Non Starting.

Hi Nigel,
this should be a cable issue, maybe at the relay-connector.

Regards
Norbert

Hi Nigel,

if 24 does not receive +12V, injectors will never work. So fuel pump works for 1s when you switch on ignition ? 19 should read 0V for 1 second. 0V activates fuel pump relay.

Hi Norbert, I will have another look at the pump relay connections tomorrow. What does OV mean  ? Thank you for your help ,let's hope we can sort this ,Regards Nigel.

OV means 0 Volt

Regards
Norbert

Hi Norbert,I've checked theconnections to the pump relay and they all look good .Turned on the ignition and both pins on 87 are dead..I've also checked the main relay connections all good and the double clear plastic block connections mounted on the mounting bracket of the top brake servo .RHD cars have two.Im really lost.I drove the car Monday,although it was slow to start and warm up.Regards Nigel.

Hi Nigel,
after 'ignition on' pin 87 of the fuel pump relay will be +12 Volt only for one second.
You have to find out the reason for the voltage on lead 24 is so low.

As Volker described, this is the power source for the injectors and they will not work with such a low voltage.

Regards
Norbert