- Beiträge: 2600
- Dank erhalten: 744
Willkommen auf der Automobilseite des Jetronic.org Forums ! - Welcome to the Automotive part of the Jetronic.org forum !
Erzählt uns und anderen, wer Ihr seid und warum Ihr Euch auf diesem Forum registriert habt.
Ich heiße alle Auto-Begeisterten hier herzlich willkommen und hoffe, Euch häufig hier zu sehen.
Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!
Erzählt uns und anderen, wer Ihr seid und warum Ihr Euch auf diesem Forum registriert habt.
Ich heiße alle Auto-Begeisterten hier herzlich willkommen und hoffe, Euch häufig hier zu sehen.
Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!
Engine Problem
- nordfisch
-
- Abwesend
- Platin
-
Weniger
Mehr
7 Jahre 4 Monate her - 7 Jahre 4 Monate her #8515
von nordfisch
nordfisch antwortete auf Engine Problem
Hi Juan,
my Best Wishes for the New Year, too.
Congratulations the engine runs...
Concerning your questions:
The idle-speed in warming-up is no limited or regulated electronically. The speed is given by the amount of air flowing through the auxiliary air-valve. Have a look: jetronic.org/en/d-jetronic/aav
Maybe the valve opens a bit too much... it is not user-adjustable <maybe Volker could do it> and it is quite expensive.
Regarding your warm-start-problems try the folloiwing: Push the gas pedal two times down all the way with 'ignition on' before starting. This gives an extra amount of fuel.
Your question '3' and all other problems about the technical data and repairing the W116 will be answered in Volker's second forum (with a section for the W116), ask your questions there: sternzeit-107.de/en/forum/w116-forum
Regards
Norbert
my Best Wishes for the New Year, too.
Congratulations the engine runs...
Concerning your questions:
The idle-speed in warming-up is no limited or regulated electronically. The speed is given by the amount of air flowing through the auxiliary air-valve. Have a look: jetronic.org/en/d-jetronic/aav
Maybe the valve opens a bit too much... it is not user-adjustable <maybe Volker could do it> and it is quite expensive.
Regarding your warm-start-problems try the folloiwing: Push the gas pedal two times down all the way with 'ignition on' before starting. This gives an extra amount of fuel.
Your question '3' and all other problems about the technical data and repairing the W116 will be answered in Volker's second forum (with a section for the W116), ask your questions there: sternzeit-107.de/en/forum/w116-forum
Regards
Norbert
Letzte Änderung: 7 Jahre 4 Monate her von nordfisch.
Folgende Benutzer bedankten sich: thomasgu
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Dr-DJet
-
- Offline
- Moderator
-
- Dr-DJet repariert und sammelt alles! :-)
7 Jahre 4 Monate her #8517
von Dr-DJet
Viele Schraubergrüße - best regards, Dr-DJet Volker
Alles für den Mercedes-Benz R/C 107 und W116 in der SLpedia Sternzeit 107
Workshops Heizung/Klima 10.5.(HU), D-Jetronic 28.6.(F),20.9.(ER), K-Jetronic 31.5.(ER),23.8.(F)
Dieses Bild ist für Gäste verborgen.
Dr-DJet antwortete auf Engine Problem
Hi Juan,
also best wishes for 2018 to you.
Engine revs on cold engine should be aroung 1000 rpm with 700-750 at warm engine. As Norbert correctly states this is done by Auxiliary air valve.
Warm start problems are normally due to steam bubbles in fuel line or leaking injectors. Check how quickly fuel pressure drops after switching off ignition and whether you have leaking injectors.
Technical data for your W116 is best asked in my 2nd forum for MB 107 and 116.
also best wishes for 2018 to you.
Engine revs on cold engine should be aroung 1000 rpm with 700-750 at warm engine. As Norbert correctly states this is done by Auxiliary air valve.
Warm start problems are normally due to steam bubbles in fuel line or leaking injectors. Check how quickly fuel pressure drops after switching off ignition and whether you have leaking injectors.
Technical data for your W116 is best asked in my 2nd forum for MB 107 and 116.
Viele Schraubergrüße - best regards, Dr-DJet Volker
Alles für den Mercedes-Benz R/C 107 und W116 in der SLpedia Sternzeit 107
Workshops Heizung/Klima 10.5.(HU), D-Jetronic 28.6.(F),20.9.(ER), K-Jetronic 31.5.(ER),23.8.(F)
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Folgende Benutzer bedankten sich: thomasgu
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Dr-DJet
-
- Offline
- Moderator
-
- Dr-DJet repariert und sammelt alles! :-)
7 Jahre 4 Monate her - 7 Jahre 4 Monate her #8521
von Dr-DJet
Viele Schraubergrüße - best regards, Dr-DJet Volker
Alles für den Mercedes-Benz R/C 107 und W116 in der SLpedia Sternzeit 107
Workshops Heizung/Klima 10.5.(HU), D-Jetronic 28.6.(F),20.9.(ER), K-Jetronic 31.5.(ER),23.8.(F)
Dieses Bild ist für Gäste verborgen.
Dr-DJet antwortete auf Engine Problem
Hi Juan,
I am considering to fly to Istanbul for s ahort trip during this month If u want me to bring any parts for testing, I can do so.
I am considering to fly to Istanbul for s ahort trip during this month If u want me to bring any parts for testing, I can do so.
Viele Schraubergrüße - best regards, Dr-DJet Volker
Alles für den Mercedes-Benz R/C 107 und W116 in der SLpedia Sternzeit 107
Workshops Heizung/Klima 10.5.(HU), D-Jetronic 28.6.(F),20.9.(ER), K-Jetronic 31.5.(ER),23.8.(F)
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Letzte Änderung: 7 Jahre 4 Monate her von Dr-DJet.
Folgende Benutzer bedankten sich: thomasgu
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- rsadut
-
Autor
- Offline
- Senior
-
Weniger
Mehr
- Beiträge: 78
- Dank erhalten: 38
7 Jahre 4 Monate her #8524
von rsadut
rsadut antwortete auf Engine Problem
Hi Volker,
It would be a pleasure to meet you in person.
Please let me know when you plan to arrive.
I will be absent between Jan. 8-12 for business.
At least I could ask you to check my old ECU.
Best Regards
Juan
It would be a pleasure to meet you in person.
Please let me know when you plan to arrive.
I will be absent between Jan. 8-12 for business.
At least I could ask you to check my old ECU.
Best Regards
Juan
Folgende Benutzer bedankten sich: thomasgu
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Dr-DJet
-
- Offline
- Moderator
-
- Dr-DJet repariert und sammelt alles! :-)
7 Jahre 4 Monate her #8525
von Dr-DJet
Viele Schraubergrüße - best regards, Dr-DJet Volker
Alles für den Mercedes-Benz R/C 107 und W116 in der SLpedia Sternzeit 107
Workshops Heizung/Klima 10.5.(HU), D-Jetronic 28.6.(F),20.9.(ER), K-Jetronic 31.5.(ER),23.8.(F)
Dieses Bild ist für Gäste verborgen.
Dr-DJet antwortete auf Engine Problem
Sorry Juan,
I cannot (YET ?) detect a mistuned ot broken ECU by resting my hands on it.
I could only bring components for you to swap and test if that helps. I remember that I once recorded the 450 ECU wire drawing during another vacation in Istanbul. 2 weeks of vacations while my wife was shopping
but testing it requires a test stand that is too large to carry.
I plan to fly 2nd half of January. I wonder whether I will still recognize the city, it is a 3 years that I have not been there now.
I cannot (YET ?) detect a mistuned ot broken ECU by resting my hands on it.

I could only bring components for you to swap and test if that helps. I remember that I once recorded the 450 ECU wire drawing during another vacation in Istanbul. 2 weeks of vacations while my wife was shopping

I plan to fly 2nd half of January. I wonder whether I will still recognize the city, it is a 3 years that I have not been there now.
Viele Schraubergrüße - best regards, Dr-DJet Volker
Alles für den Mercedes-Benz R/C 107 und W116 in der SLpedia Sternzeit 107
Workshops Heizung/Klima 10.5.(HU), D-Jetronic 28.6.(F),20.9.(ER), K-Jetronic 31.5.(ER),23.8.(F)
Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.
Folgende Benutzer bedankten sich: thomasgu
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
Ladezeit der Seite: 0.263 Sekunden