- Posts: 2
- Thank you received: 0
M117 4.5 D Jet Throttle Linkage Arms
- djetsearcher
- Topic Author
- Offline
- New Member
-
Less
More
26 Feb 2026 04:19 - 26 Feb 2026 04:20 #24500
by djetsearcher
M117 4.5 D Jet Throttle Linkage Arms was created by djetsearcher
Does anyone have a part number or source for the throttle body linkage arms for a M117 D Jetronic?
Image below of the specific rod that I need. I have the two springs and ball joint ends, but my rod is damaged at the thread tip, and thus you cannot attach/screw on the ends.
Tom
Image below of the specific rod that I need. I have the two springs and ball joint ends, but my rod is damaged at the thread tip, and thus you cannot attach/screw on the ends.
Tom
This image is hidden for guests.
Please log in or register to see it.
Please log in or register to see it.
Last edit: 26 Feb 2026 04:20 by djetsearcher.
Please Log in or Create an account to join the conversation.
- Dr-DJet
-
- Offline
- Moderator
-
- Dr-DJet repariert und sammelt alles! :-)
26 Feb 2026 12:56 #24501
by Dr-DJet
Viele Schraubergrüße - best regards, Dr-DJet Volker
Alles für den Mercedes-Benz R/C 107 und W116 in der SLpedia Sternzeit 107
This image is hidden for guests.
Replied by Dr-DJet on topic M117 4.5 D Jet Throttle Linkage Arms
Hi Tom,
the easiest is to buy thread cutter (left or right) and recut.
If not: I believe that rod is N900331005161 .
the easiest is to buy thread cutter (left or right) and recut.
If not: I believe that rod is N900331005161 .
Viele Schraubergrüße - best regards, Dr-DJet Volker
Alles für den Mercedes-Benz R/C 107 und W116 in der SLpedia Sternzeit 107
This image is hidden for guests.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- djetsearcher
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
26 Feb 2026 13:33 #24502
by djetsearcher
Replied by djetsearcher on topic M117 4.5 D Jet Throttle Linkage Arms
Hi Volker
The part number you gave is for the longer linkage that is just behind the throttle body in the image. Any other idea?
I’ll look into the cutter for now but will renew these.
The part number you gave is for the longer linkage that is just behind the throttle body in the image. Any other idea?
I’ll look into the cutter for now but will renew these.
Please Log in or Create an account to join the conversation.
Time to create page: 0.166 seconds