Jaguar V12 Sensors, Cold Start and Cold Idle

Hi Gareth,

before you do that. Have you diagnosed that your thermno time switch is broken? If you disconnect electrical connector on cold start valve and your problem is gone, you can already see if problkem comes from Thermo Timne switch.

Hi- Thanks Volker- annoyingly the sensor connector casing entirely disintegrated when I removed the female plug, so I have two bare male pins. My only reliable remedy is to replace the whole sensor- unless you have alternative recommendation.

Hi Gareth,
here is the complete connector: www.ebay.de/itm/116297124575?_trkparms=a...47TYXAJVZ1SK2BBA0NJV
You have to take care not to interchange the cables.
The new TTS would get damaged.

Regards
Norbert

Hi Norbert,

I understand that the male connector on TTS housing is broken not the female wiring housing connector.

Hi Volker,
he asked for the connector he needs for installing the new-type TTS.

Regards
Norbert

this is great- yes it is the connector for installing the new type TTS. Thank you gentlemen.