pressure sensor bosch 0280100012

Good evening friends, i suspect that pressure sensor 0280100012 of my 350 SL necessity revision. 
please,how can i solve? Many Thanks 
Marco 

 

Hi Marco,

did you do the vacuum leak test that I describe in chapter 4.4 ?

Ciao Volker, i refer to my car repairer to use your instructions.
Many thanks,
Marco

Hi Volker, I'm Marco, I performed the test on my sensor 0280100012 as described in paragraph 4.4 of your precious instructions, unfortunately the depression decreases from - 0.5 bar to - 0.45 bar in about 3 seconds, the engine runs well at idle but the CO is high (4..
Please, I'm asking if you can help me.
many thanks, Marco from Italy.

Hi Volker, I'm Marco, I performed the test on my sensor 0280100012 as described in paragraph 4.4 of your precious instructions, unfortunately the depression decreases from - 0.5 bar to - 0.45 bar in about 3 seconds, the engine runs well at idle but the CO is high (4..
Please, I'm asking if you can help me.
Many thanks, Marco from Italy.

Hi Marco,

it does not help to repeatedly open new threads asking the same question. It helps to read your messages where I have given you an answer: My recommendation is that you check with your local Italian Bosch Classic service. For sure your MAP sensor is broken and needs an overhaul. No wonder you have a high CO.

Many thanks Volker, I'll try contact Bosch through official partner, because this is only way to contact.
Please,you know alternative offering review service?
Again many thanks and congratulations.
Marco